-40%

DATAKOM DKG-173 230/400V Generator / Mains Automatic Transfer Switch Panel (ATS)

$ 70.21

Availability: 190 in stock
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Brand: Datakom
  • Condition: New
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    WE DO NOT SELL THIS PRODUCT TO USA AND CANADA
    DESCRIPTION
    The DATAKOM model DKG-173 is a DIN Rail mounted ATS controller not requiring DC supply. The unit monitors 3-phase mains voltages, sends remote start command to the generating set and performs changeover of both generator and mains contactors. The front panel leds provide information about mains and generator power availability as well as contactor positions.
    Mains return delay and genset contactor delays are adjustable between 1 and 40 seconds through front panel knobs.
    OPERATION
    When both mains voltages are over the limit:
    R
    ,
    MC
    ,
    RST
    leds are on.
    The
    MCB
    terminal is supplied with voltage R.
    The
    REMOTE START
    relay contact is open.
    If any AC phase voltage goes below limit:
    R
    ,
    MC
    ,
    RST
    leds turn off.
    The
    MCB
    terminal is open.
    The
    REMOTE START
    relay contact closes.
    The
    REMOTE START
    output is expected to provide a genset running condition.
    When the genset voltage G is over the limit:
    The
    G
    led turns on.
    At the expiration of the genset contactor delay the
    GC
    led  turns  on  and  the
    GCB
    terminal is supplied with voltage
    G
    .
    When both mains voltages are over the limit:
    R
    and
    RST
    leds turn on.
    At the expiration of the mains return delay the
    MC
    led turns on and the
    MCB
    terminal is supplied with voltage R.
    The
    REMOTE START
    relay contact opens.
    The  contactor delays for the genset and are manually adjusted via potentiometers situated on the front panel of the unit.
    INPUTS
    R-S-T:
    Mains phase voltages.
    NEUT-MN:
    Mains neutral terminal.
    G:
    Generator phase voltage.
    NEUT-GN:
    Generator neutral terminal.
    OUTPUTS
    MCB-MAINS CONTACTOR:
    Normally open relay output connecting the phase-R voltage to the terminal. (10A@250V-AC)
    GCB-GENERATOR CONTACTOR:
    Normally open relay output connecting the phase-G voltage to the terminal. (10A@250V-AC)
    REMOTE START:
    Normally open engine start request relay output. (10A@28V-DC/250V-AC)
    LED INDICATORS
    G:
    genset voltage present
    GC:
    genset contactor closed
    R:
    power supplied from mains
    RST:
    mains voltages present
    MC:
    mains contactor closed
    TECHNICAL SPECIFICATIONS
    Alternator Voltage:
    170-300 V-AC (Ph-N)
    Mains voltages:
    170-300 V-AC (Ph-N)
    Generator Contactor Delay:
    1 to 40 sec. adjustable
    Mains Return Delay:
    1 to 40 sec. adjustable
    MCB Relay Output:
    10A @ 250V-AC
    GCB Relay Output:
    10A @ 250V-AC
    Remote Start Relay Output:
    10A @250V-AC/28V-DC
    Operating temp.:
    -30°C (-22°F) to 70 °C (158°F).
    Storage temp.:
    -30°C (-22°F) to 80 °C (176°F).
    Maximum humidity:
    95% non-condensing.
    Dimensions:
    70x115x66mm (WxHxD)
    Weight:
    180g (approx.)
    Installation:
    DIN Rail mounted.
    Case Material:
    High Temp. ABS/PC (UL94-V0)
    IP Protection:
    IP20
    Conformity (EU directives)
    2006/95/EC (low voltage)
    2004/108/EC (EMC)
    Norms of reference:
    EN 61010 (safety requirements)
    EN 61326 (EMC requirements)
    Check also the newest DKG-175 ATS 230/400VAC, DIN Rail mounted controller:
    https://www.ebay.com/itm/192389838568
    ---------------------------------------------------------------------------------------------------------------
    Check our contactor pairs for this controller here:
    ELPRO CEM-40 Contactor Pair, 3P 40A 120/208V
    ELPRO CEM-40 Contactor Pair/Set, 3P 40A 120/208V 60Hz with interlocking
    ELPRO CEM-40 Contactor Pair, 3P 40A 230/400V
    ELPRO CEM-40 Contactor Pair/Set, 3P 40A 230/400V 50Hz with interlocking
    ELPRO CEM-65 Contactor Pair, 3P 65A 120/208V
    ELPRO CEM-65 Contactor Pair/Set, 3P 65A 120/208V 60Hz with interlocking
    ELPRO CEM-65 Contactor Pair, 3P 65A 230/400V
    ELPRO CEM-65 Contactor Pair/Set, 3P 65A 230/400V 50Hz with interlocking
    Visit my eBay Store:
    Datakom-controllers4generators
    ---------------------------------------------------------------------------------------------------------------
    Check out
    my
    other items
    for generator sets:
    J1939 Communication Units
    Synchronization Units
    Automatic Mains Failure Units
    Remote Start Units
    Manual Start Units
    Automatic Transfer Switches
    Battery Chargers
    Alternator Voltage Regulators
    Panel Measurement Units
    Earthquake Units
    Telecommunication Units
    Extension Units
    ---------------------------------------------------------------------------------------------------------------
    We have a long time experience in international sales
    and make delivery only with traceable service.
    --------------------------------------------------------------------------------------------------------------
    Other datakom products on
    www.controllers4generators.com
    --------------------------------------------------------------------------------------------------------------
    ALL CUSTOMS FEES IN COUNTRY OF DESTINATION ARE UNDER BUYER'S  RESPONSIBILITY